PDA

View Full Version : stuff i produced


Malfunction
02-04-2007, 10:58 AM
after much learning, here's some stuff i made with the CW.
pkunk
02-04-2007, 11:09 AM
OK, you've really got me curious! :D How did you make chain? Will you share the MPC?
BobHill
02-04-2007, 11:26 AM
I'll second that. Another great idea.

Bob
Malfunction
02-04-2007, 11:32 AM
here's the chain programs. i had to run chains1 first, then chains2. if i combine the 2 programs, it carves out the outer part fist, then the inner, and the whole thing breaks off. of course i use pine, so that may be why.

i make them out of 3/4" pine, then cut them in half with my cheapo bandsaw.

then i round off all the edges with my belt sander and dremel.

the "trick" is to take a razor blade and cut every other link in half, then glue the assembly together. use rubber bands or small clamps to clamp it together.

it's a lot of work, but i like the payoff.
pine acres woodshop
02-04-2007, 02:54 PM
Nice job on the chains very creative.
Malfunction
02-04-2007, 10:10 PM
thank you pine acres.

for me it's an excellent use for a lot of my scrap wood.
Aaron B
02-05-2007, 06:59 AM
That is very clever. Looks really nice after you got done.
smartalecy
02-05-2007, 09:44 AM
They both look great. My software doesn't have the Angel pattern. Would you share it?
BenCraig
02-05-2007, 01:35 PM
They both look great. My software doesn't have the Angel pattern. Would you share it?

The angel was posted here:

http://carvewright.com/forum/viewtopic.php?t=1015&postdays=0&postorder=asc&highlight=angel&start=15

Tip: You can use the 'Search' option in the upper right corner of the screen to find see if anyone has previously posted the answer to any questions or posted any designs in which you're looking for. :D Have a good 'un.

BC