JuicyCarp
01-15-2013, 08:13 AM
Good morning,
I am going to attempt my first scan this weekend with the probe. I will be scanning a carved wood badge/plaque that a coworker would like replicated. The original is carved from Honduran mahogany and i don’t want to damage it at all. I got the glue tips for the probe, but how do i attach the original to a sled without damaging it. I have seen that people have used hot glue and double sided tape, but i am concerned that both might damage the finish on the original. And of course screwing it down is not an option. I thought i would throw this out to the professionals and see if anyone has any good advice.
Thanks!
Kevin
I am going to attempt my first scan this weekend with the probe. I will be scanning a carved wood badge/plaque that a coworker would like replicated. The original is carved from Honduran mahogany and i don’t want to damage it at all. I got the glue tips for the probe, but how do i attach the original to a sled without damaging it. I have seen that people have used hot glue and double sided tape, but i am concerned that both might damage the finish on the original. And of course screwing it down is not an option. I thought i would throw this out to the professionals and see if anyone has any good advice.
Thanks!
Kevin