Carl H
01-11-2013, 12:41 AM
I made this before I got my CW. I used it on my scroll saw. It is powered by a shopvac and does a pretty good job of settling the dust out prior to reaching the vac.
I used two traffic cones from a dollar store, a 5 gallon pail with a screw on lid, 4 dowels and some plastic fittings. Also a whole bunch of silicone sealer. I know now I have the machine I could do a better job but the traffic cones are ideal and the total cost of the project was under 10 dollars.
58818
I used two traffic cones from a dollar store, a 5 gallon pail with a screw on lid, 4 dowels and some plastic fittings. Also a whole bunch of silicone sealer. I know now I have the machine I could do a better job but the traffic cones are ideal and the total cost of the project was under 10 dollars.
58818