Newbie in Coeur a'Alene, ID

[jeeptrix]

I just got my Carvewright and am getting used to designing and peoducing new projects. I bought it from a friend who had it four years and never turned it on so it is like new.

There are a couple of things I do need help with.

How do you find newly designed projects that can be downloaded and made? How about that aftermarket piece that allows for different bits to be changed out easily?

When I downloaded the newest software to my desktop and then downloaded another to my laptop there were some designs missing. Anyone know why?

And the most serious question: is it common for the belt to rip? The edge of it has rippped and now becomes jammed. It also looks like the edge is folded under and is starting to slide sideways. Is there a written procedure for taking the belt ou so perhaps I can trip the edge?

Sorry for all the questions but this is all new to me.

[eelamb]

Here is a link to past designs http://www.lambswoodworking.com/cw
As for the belts, yes they move and it is common to tear off a section to prevent them from rolling under. I understand the upgraded rubber belts do not do this.
On the carvewright site are many manuals, tips and trick, maintenance documentations. Plus AksBud has many tutorials on his site. Just look for a post by him and click the links provided.

[jeeptrix]

Thanks for the info. Is there a way to move the roller around in order to cut those edges off or do I have to remove the whole thing.

[fwharris]

Thanks for the info. Is there a way to move the roller around in order to cut those edges off or do I have to remove the whole thing.

You can cut the rolled over edge off with out taking the belt tray out of the machine. Cut the belt with a sharp knife at the point you want and then push on the belt, might need both hands, and you can rotate the belt to continue the cut.

[jeeptrix]

You can cut the rolled over edge off with out taking the belt tray out of the machine. Cut the belt with a sharp knife at the point you want and then push on the belt, might need both hands, and you can rotate the belt to continue the cut.
I will try again. It barely moved probably because it is rolled under.
Any way to prevent this from happening again?
Is it worth it to get the other type of roller?

[henry1]

I just got my Carvewright and am getting used to designing and peoducing new projects. I bought it from a friend who had it four years and never turned it on so it is like new.

There are a couple of things I do need help with.

How do you find newly designed projects that can be downloaded and made? How about that aftermarket piece that allows for different bits to be changed out easily?

When I downloaded the newest software to my desktop and then downloaded another to my laptop there were some designs missing. Anyone know why?

And the most serious question: is it common for the belt to rip? The edge of it has rippped and now becomes jammed. It also looks like the edge is folded under and is starting to slide sideways. Is there a written procedure for taking the belt ou so perhaps I can trip the edge?

Sorry for all the questions but this is all new to me.
Were are you from Coeur a'Alene, ID were is that situated

[jeeptrix]

About a hour from the Canadian border, next to Spokane. WA.

[TerryT]

I just got my Carvewright and am getting used to designing and peoducing new projects. I bought it from a friend who had it four years and never turned it on so it is like new.

There are a couple of things I do need help with.

How do you find newly designed projects that can be downloaded and made? How about that aftermarket piece that allows for different bits to be changed out easily?

When I downloaded the newest software to my desktop and then downloaded another to my laptop there were some designs missing. Anyone know why?

And the most serious question: is it common for the belt to rip? The edge of it has rippped and now becomes jammed. It also looks like the edge is folded under and is starting to slide sideways. Is there a written procedure for taking the belt ou so perhaps I can trip the edge?

Sorry for all the questions but this is all new to me.

Howdy neighbor,
Nice to see a good machine getting a chance to be used. There used to be a guy on the forum from Coeur d'Alene the used the name "Toymaker" I think it was. Any way nice to see another user so close.

[jeeptrix]

Howdy neighbor,
Nice to see a good machine getting a chance to be used. There used to be a guy on the forum from Coeur d'Alene the used the name "Toymaker" I think it was. Any way nice to see another user so close.
Is there a thread where users from the same area can get together and learn from each other?

[TerryT]

There is this one.
http://forum.carvewright.com/forumdisplay.php?68-A-Carver-Near-You

[jeeptrix]

Unfortunetly there isn't anyone in all of Idaho. Guess people here are too busy hunting and fishing.

[Dale]

We don't all hunt and fish! I live in Athol and have had my machine for only about a year so I am far from an expert but I will help where I can. I took a class from TerryT who lives in Spokane (response#8 )which was a tremendous help. Not sure if he still gives the classes, maybe pm him to ask. Anyways Welcome to the forum and do not be afraid to ask questions, someone will have the answer.

Dale

[fwharris]

I will try again. It barely moved probably because it is rolled under.
Any way to prevent this from happening again?
Is it worth it to get the other type of roller?

This is in the troubleshooting area on the main CW site http://www.carvewright.com/support-page/troubleshooting-guide/troubleshooting-the-carvewright/#sandpaper_belts_rolling_up

And here is the procedure for replacing the belts http://www.carvewright.com/assets/service/Service_instructions/CarveWright_service_replace_sandpaper_belt.pdf

I do think the rubber belts do track a lot better.

[bergerud]

Here is an old post:

TIP: The sand paper rollers need not be removed and put in a vise to re-center the belts. Cut two 3/8" diameter approximately 0.8" long pieces of metal or hardwood. These two pieces can be wedged between the spring shafts and the edges of the outfeed table (see pictures below). The cam action of lifting the outfeed table pushes on the spring shafts and releases the tension on the sand paper belt. The belt can easily be slid back to center. (Make sure you unroll the edge of the belt if if has rolled up.) The same procedure works on the front and rear belts. (While the belts are loose, you can shake them around and blow out any saw dust.)

(http://forum.carvewright.com/showthread.php?t=10651&highlight=belt+trick)


http://forum.carvewright.com/images/misc/paperclip.png Attached Thumbnails http://forum.carvewright.com/attachment.php?attachmentid=51158&stc=1&thumb=1&d=1236309622 (http://forum.carvewright.com/attachment.php?attachmentid=51158&d=1328573033) http://forum.carvewright.com/attachment.php?attachmentid=51157&stc=1&thumb=1&d=1236309643 (http://forum.carvewright.com/attachment.php?attachmentid=51157&d=1328573033)

[jeeptrix]

That's a great tip. Wish I had read it sooner. I was finally able to get the damaged piece out and am running a project. It said it will take 9 hours when I uploaded it to memory. I have several hours to go. I will then try the wood pieces and move the belt. So far it is only the rear belt.

[chebytrk]

Excellent tip!

[crfahy]

I bought my machine from a friend here in Weippe, Idaho a year ago. One of the belts was torn, so I decided to get the rubber belts when I ordered the carvetight to replace the 'quick chuck'. I'm glad that I got both of them! I think you're lucky to live so close to Terry T. I would have gone to see him if not for the 4 hr. drive. I read all the 'tips and tricks' and Ask Bud's lessons - they really helped! Searches on this forum can also answer a LOT of questions. I put about 150 hrs on the machine last winter, and now I'm back in my wood shop since fishing/gardening season is over. I guess we could start an 'Idaho' thread in the 'carvers near you' category, although I'm guessing I'm still nowhere 'near' any other carvers! Hope you have fun with it!

[TerryT]

Colleen, actually there are a couple of guys in Lewiston. Thats not too awful far from you.

Oh, and by the way, you are always welcome in my shop if you do get up this way.

[jeeptrix]

I read somewhere on this forum that you either give lessons or in person help on the CW. Is that true?