starting and stopping

[alias]

Just have a question can i start a project on the carvewright then stop it and come back later and restart it and if yes how?
thanks for the help

[fwharris]

You sure can! to PAUSE a carving just press the STOP button ONE TIME. You should get a display saying "press start to continue or stop to abort".

When pausing a carve for a length of time I always open the clear cover to insure that it does not inadvertently restarted or stopped...

[chkorte]

And just make sure you DON'T turn the CW off!!!!

[badbert]

and just make sure you don't turn the cw off!!!! or unplug it!!

[eharsin21]

How long of a carve can you run without lifting the clear cover to allow the machine to cool down? I am running a 5 1/2 hr. project and don't want to overheat it. I am thinking after every 2 hours? What are anyone's thoughts?
Thanks, Ernie H.

[fwharris]

Do you have any dust collection for the machine? If so let it carve and just monitor the heat of the flex shaft and carve quality..

[DickB]

Agree, let it run. I've gone 8+ hours.

[unitedcases]

In the blazing summer I have done some 12 and 13 hr carves. Just watch your flexshaft. My dust collector gave out before the cw even started sweating.

Sent from my ADR6300 using Tapatalk 2