View Full Version : CompuCarve Serial Number
Andy Haney
01-30-2007, 06:18 AM
I'm not an owner, but a frequent woodworking forum lurker. I joined here to try and help a friend who just received a CompuCarve. Apparently, initial computer set-up requires entry of the serial number, and he can't find it on the machine. Any help?
Andy
Aaron B
01-30-2007, 06:57 AM
You can find the serial number through the options menu on the key pad. It will pull it up on the screen once you find the option.
The Bard
01-30-2007, 08:57 AM
it is also printed on the barcode near the bottom of the front of the machine, under the metal outfeed tray.
starts with "A".
If the serial on the machine down by the bar code is like mine. It started with a AQ then 3 numbers then a dot then 3 more numbers. Well when you bring it up on the display screen it said AQ. there was no dot on the one by the barcode. So I tried it without the dot and it wasn't correct. It wanted the dot. So just in case yours is like mine. I hope this helps.
The Bard
01-30-2007, 03:08 PM
The dots must flow.
Andy Haney
01-30-2007, 06:08 PM
Thanks guys. Just called the friend and relayed this information. I'll let you know if he tells me it works.
Andy
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.