PDA

View Full Version : CompuCarve Serial Number



Andy Haney
01-30-2007, 06:18 AM
I'm not an owner, but a frequent woodworking forum lurker. I joined here to try and help a friend who just received a CompuCarve. Apparently, initial computer set-up requires entry of the serial number, and he can't find it on the machine. Any help?

Andy

Aaron B
01-30-2007, 06:57 AM
You can find the serial number through the options menu on the key pad. It will pull it up on the screen once you find the option.

The Bard
01-30-2007, 08:57 AM
it is also printed on the barcode near the bottom of the front of the machine, under the metal outfeed tray.

starts with "A".

beek
01-30-2007, 11:58 AM
If the serial on the machine down by the bar code is like mine. It started with a AQ then 3 numbers then a dot then 3 more numbers. Well when you bring it up on the display screen it said AQ. there was no dot on the one by the barcode. So I tried it without the dot and it wasn't correct. It wanted the dot. So just in case yours is like mine. I hope this helps.

The Bard
01-30-2007, 03:08 PM
The dots must flow.

Andy Haney
01-30-2007, 06:08 PM
Thanks guys. Just called the friend and relayed this information. I'll let you know if he tells me it works.

Andy