View Full Version : Help! I need a Cove Moulding Pattern!!
cnsranch
04-01-2012, 09:01 AM
This is for a jewelry box - the patten will be reduced down to 1" wide by 15" long.
I need to carve it with the carving bit - have seen a couple that use ogees, etc., but they won't work.
Wood is 1/2" thick.
Sure would appreciate it, folks.
jpaluck
04-01-2012, 09:59 AM
post the side profile of the moulding you need...
jpaluck
04-01-2012, 10:41 AM
Not sure what profile you need..here is basic one
cnsranch
04-01-2012, 11:58 AM
Here's more of what I'm looking for - thanks for your help, John.
DocWheeler
04-01-2012, 12:58 PM
Jerry,
BJ created something like that with Gradient Designer awhile back.
I don't have the program but maybe BJ still has it.
Kenm810
04-01-2012, 02:04 PM
Maybe -- Something like this? ----- Did it in CW Designer
James RS
04-01-2012, 02:22 PM
I gave it a shot from your photo
52135
SteveNelson46
04-01-2012, 03:49 PM
I made this one from your photo also. What's amazing is that James' and mine look almost identical.
cnsranch
04-02-2012, 09:52 AM
You guys are the best!
How'd you do that?
SteveNelson46
04-02-2012, 10:10 AM
I used "Aspire" and saved it as an .STL
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.