PDA

View Full Version : Please check my time-to-complete



HandTurnedMaple
01-23-2007, 06:53 PM
I'm asking for someone to check the cutting times on these two projects for me. If my CW actually arrives on Friday, then it will really help me finish my current bookcase project (maybe). The two plans are slightly different because I don't know if my 3/8" dado bit will arrive on time to help me with this.

Thanx

pkunk
01-23-2007, 08:19 PM
A small problem. I hope you have a tablesaw. Both require the board to be wider than what you want because the rollers can't be allowed to fall into the cross dados. You'll have to deal with that.
Long carve-auto jig - normal res.- 41:44
Longside " " -1:03:12

HandTurnedMaple
01-23-2007, 08:37 PM
Thanx for the help. I can dado all 54 slots (6 boards x 9 dadoes) in about 1:15, so I guess I will still have to do some work on my projects. :(

Dan-Woodman
01-23-2007, 10:27 PM
Those DADO'S are only 3/8" deep , Idon't think they would interfere with the rollers ,would they?
If it does ,cut a strip of wood 3/8x3/4x7.50 andstop machine after each dado and insert strip and push enter to continue.

HandTurnedMaple
01-23-2007, 11:06 PM
Sounds like a lot of extra work and time for something I can do 6x faster and probably with less noise (with a portable router). :shock: