Need help to create raise panel on this MPC

[gwizpro]

HI ,

I have this valence kitchen project for the wife going on an I could use a lil help.
I have tried to no avail to create a raised panel border on the mpc attached.

It should be 1" wide all the way around the board.

Any help would be appreciated.

Thanks Tom5079650797

[DickB]

I would use Wolfie's Gradient Designer program for this: http://www.wolfiesden.com/downloads/utilities.asp The program is a very useful tool for use with the CraveWright and well worth the time it takes to learn how to use it. I have used it many times. Draw the profile that you want with the program and generate a black-and-white image depth map. Import the image to a drawing program such as paint.net and edit the image to trapezoidal shape. Import as a pattern, then rotate and stretch as needed around the edge of your board. I think that you will need to use a sled to carve this, or Designer will complain when you go to upload it.

[blantz]

This was done in designer. You can change the way it looks with depth and height settings.

[DocWheeler]

Tom,

Here is the mpc that I used to create panel doors.
I removed the patterns that I had in the middle.
You will need to play around with dimensions.

50811