PDA

View Full Version : adjustable carrier sled



alias
01-18-2012, 12:10 PM
Has anyone come up with an adjustable carrier sled plans if anyone has sure would appriciate a copy of the plans.

thanks :D

myshop1044
01-18-2012, 12:45 PM
Alias here is the tip and tricks on all kinds of sleds
http://www.carvewright.com/downloads/tips/CarveWrightTips&Tricks_Apr08.pdf

DickB
01-18-2012, 12:50 PM
Here's what I use. Pretty self-explanatory I think, but ask if questions.

50524

Smoken D
01-18-2012, 01:00 PM
Picture of my sleds. I use "T" track. One end is screwed down and the other end has bolt installed so it can slide up and down the "T" track along the sled. The ends I cut at 3.75" to cover the 7 inch rule. I use MDF for the end pieces because they are true 3/4" in thickness to fit the boards being carved. Plywood not true 3/4" in thickness and would be shorter in thickness than carving piece, and not stay under rollers as well.

alias
01-18-2012, 03:26 PM
Hey smokin d really like that setup could you by any chance send me the length and width of the plywood you used well what im asking is there anyway you could give me sizes and lengths and thickness i really would appriciate it thank you in advance

alias
01-18-2012, 08:01 PM
smoken d is there anyway you could give me the dimensions of all the pieces and the size of the bolts i really like what you did and it would work real nice for what i need.

thanks