View Full Version : Pics of probe

01-20-2007, 04:48 PM
I mentioned in one of my other posts about the probe eating a plaster mold I had made. I was in too much of a hurry and didn't let the plaster cure for 4-5 days (like the directions said). This time a new mold, cured, & glazed is being copied now. Last is the plaster parrot, then the destroyed first one & a pic of the probe doing it's thing. I'll post here again when it's done in a couple of hours.

01-20-2007, 08:11 PM
A little late, but the scan took 1/2 hr longer than the LCD indicated. Then there was some noise that I had to cleanup, eat dinner, and get the post together. As it comes off the scanner.
Then as it will look on a piece of wood. I don't have a file yet that I will actually use.

01-20-2007, 08:13 PM
I sure like the way your parrot turned out, Pkunk.


01-20-2007, 08:17 PM
The probe still chewed up the clear finish on the plaster casting. It's not as gentle as I'd hoped. Still like to see someone try a clay piece.