PDA

View Full Version : mpc exceeds memory card



easybuilt
11-09-2011, 10:10 PM
This woodgrain ptn exceeds the amont of space on the memory card. If I carve it at .25 it works OK but when I take the depth to anywhere deeper the file is too large. The customer would perfer .75 but .50 would work too. It is 46" X 12". Does anyone have any suggestions or have a ptn like this one that would work, free or purchase. Thank you for looking at it.

jpaluck
11-09-2011, 11:01 PM
Tom

Check in here and see if any of these will work..they are free http://www.pixologic.com/zbrush/downloadcenter/alpha/