View Full Version : head won't completely lower
woodchip
08-30-2011, 11:21 AM
I looked in the trouble shooting section, and maint. section but can't find this listed. My problem is the machine will lower to the board but does't do the ratcheting sound. the machine is clean and well lubed and I'm not sure what to check next. I hope I'm not overlooking this in the maint section. Thanks in advance.
Don
Digitalwoodshop
08-30-2011, 11:31 AM
Make sure the head is level. Check the underside of the machine for the cross connect gears to be clean. And you said NO Click... There are a bunch of old posts on cleaning the crank.
AL
woodchip
08-30-2011, 11:35 AM
Thanks AL.
Don
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.