Troubleshooting Guide

[lynnfrwd]

Here is a direct link to our online Troubleshooting Guide: http://www.carvewright.com/2010CWweb/service/Maintenence/Troubleshooting_Guide.pdf

It is located on the website under SUPPORT - MAINTENANCE.

It includes:

Description of the Issue
Possible Causes
Troubleshooting Steps


If you print this, make sure you keep in mind that it will be updated from time to time and you might not have the latest version printed!

[amundo]

Opened box missing bit remover to start. I practice removing with a glove which was ok. I inserted my wood for a simple design it ask for a 1/6 straight bit which put in. Everything started ok but it looked deep to me, mi watched and the bit fell out. I stopped fast no damage, should I have tighten up the bit collet on the machine that thin and every time
? Thanks amundo

[lynnfrwd]

You have a carvetight spindle not the old quick chuck. No bit removal tool required. Do use the t-Allen wrench to tighten the bit. 1/16 carving bit is the tapered one. Not straight.


Sent from my iPhone using Tapatalk

[Digitalwoodshop]

Opened box missing bit remover to start. I practice removing with a glove which was ok. I inserted my wood for a simple design it ask for a 1/6 straight bit which put in. Everything started ok but it looked deep to me, mi watched and the bit fell out. I stopped fast no damage, should I have tighten up the bit collet on the machine that thin and every time
? Thanks amundo


WELCOME !!!! A little homework.... Find Tips and Tricks on the CarveWright web site and check it out. Written by us users with things we have learned along the way. It will make things easier.

We are here to HELP... Just post your question and like a grasshopper jumping into a pool of hungry trout, we will all try to be the first to respond.

AL