View Full Version : first 2 sided carving
myshop1044
05-31-2011, 07:45 PM
I have 2 questions about 2 sided carvings, 1. which side will carve first, front or back?
2. base on that answer which way do I flip the board to set up correctly for the other side?
see attached.
Kenm810
05-31-2011, 07:57 PM
Normally the back side carves first, partly because all cut outs carve from the Front, -- as I understand it
AskBud
05-31-2011, 08:10 PM
I have 2 questions about 2 sided carvings, 1. which side will carve first, front or back?
2. base on that answer which way do I flip the board to set up correctly for the other side?
see attached.
As Ken said, the back carves first.
When you flip the board, just turn it as if you were rolling over in bed.
AskBud
unitedcases
05-31-2011, 08:52 PM
When you hit the "front" or "back" button in designer watch how the board flips. There is your answer.
Dan-Woodman
06-01-2011, 09:22 AM
One exception to flpping is , if your making a sign with the same thing on both sides , then you flip end for end.
later Daniel
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.