PDA

View Full Version : Error 270



Shamar0961
01-12-2007, 12:33 PM
When trying to "load the board" and cranking the head down, the crank would become very hard to crank, but it would not ratchet and gave this message. Unidentified Error. Error 270. Push Stop.
I called CarveWright and Deidra was very helpful and coached me through the fix, which was to remove the crank handle & spring. Use a small screwdriver or some such and put grease behind the washer that is around the crank shaft. Re-assemble. Yee Haw - problem fixed!
Thank you, Deidra.