rcdages
03-31-2011, 02:28 PM
Hello all,
Here is a carving I started on Tuesday evening and it ran in to Wednesday morning at 1:15am.
Carving is 16 x 10 x.75 on select pine.
Carving time 05:00 00.30 00.23 / 5 hours 30mins 23 sec. on Optimal
Letter was done using Conforming Vector.
Letter at top done with 60 degree bit lettering on bottom done with 90 degree bit.
Font used on the top lettering in Sefer-AH
Now on to sanding then finishing, the number of project that need finishing in pilling up for me to get to.
43265
Here is a carving I started on Tuesday evening and it ran in to Wednesday morning at 1:15am.
Carving is 16 x 10 x.75 on select pine.
Carving time 05:00 00.30 00.23 / 5 hours 30mins 23 sec. on Optimal
Letter was done using Conforming Vector.
Letter at top done with 60 degree bit lettering on bottom done with 90 degree bit.
Font used on the top lettering in Sefer-AH
Now on to sanding then finishing, the number of project that need finishing in pilling up for me to get to.
43265