PDA

View Full Version : Probe software



mijoda52
03-01-2011, 02:39 PM
Hey Everybody,
Can anybody tell me if the software that comes with the probe is the same as the software that came with the machine? Thanks, Michael

fwharris
03-01-2011, 02:53 PM
Hey Everybody,
Can anybody tell me if the software that comes with the probe is the same as the software that came with the machine? Thanks, Michael

When you get the probe it will come with a license code to un lock the "pattern editor software" that is already built into the designer software. You will need to enter that code into the "mangae license" drop down box in the help tab...

lynnfrwd
03-01-2011, 03:21 PM
Code should be on the back of the disk that came in the box with the probe. It is not necessary to load the disk as it is the same Project Designer software.

All advanced software is already included in the Project Designer Software (well assuming you have the latest version...available at www.carvewright.com/update). It is now available in a demo mode until "activated" with the code. Codes are all caps and decimal points are necessary.

Most common activation issue......code starts AFTER the colon!
Example: Software Serial Key #1: XXXX.XXXX.XXXX

enter XXXX.XXXX.XXXX into the activation code - not the # sign, not the number and not the colon.
Please use the real letters & numbers of course - not XXXX's!!!