Ike
12-14-2010, 11:38 AM
My other CW was down due to a bad cover switch so I thought! I had a spare and installed it, but it was bad also. So I ordered 2 more and installed the new one tested it and still cover open!
So I replace the connection board still cover open, so with the other new switch I plugged it in for a test. Cover open, so I tested my other CW with the new switch worked fine!
So I replaced the circuit board with the original again and still open. I looked at my spare CC and followed the wires and I noticed the blue wire to the motor from the circuit board has a couple clips to tuck it in. So I tucked the wire in and the switch worked!
So I though ok a loose or broken wire? I wiggled several wires and no change. I am not saying by tucking the wires in it solved my problem. But all I know I have 2 CW back in action and I am happy!
Ike
So I replace the connection board still cover open, so with the other new switch I plugged it in for a test. Cover open, so I tested my other CW with the new switch worked fine!
So I replaced the circuit board with the original again and still open. I looked at my spare CC and followed the wires and I noticed the blue wire to the motor from the circuit board has a couple clips to tuck it in. So I tucked the wire in and the switch worked!
So I though ok a loose or broken wire? I wiggled several wires and no change. I am not saying by tucking the wires in it solved my problem. But all I know I have 2 CW back in action and I am happy!
Ike