Memory card Sticking

[Oldsarge]

The memory card really sticks when inserted into my CW. It takes a great deal of pressure to remove it from the slot. What can I lubricate this with? I don't want to damage anything.

[rncurrie]

I had the same problem with a card I bought. I called CW and also questioned the form. from what I understand its in our mind. I put duct tape on the pulling end of mine that way I have a something good to tug at and I've learned to live with it. My other two cards work fine so regardless what CW told me the card was not QC'd.
Richard

[Oldsarge]

There must be some way to lubricate the memory card. I know stuck. The card is stuck. Maybe a tiny bit of dielectric grease?

[earlyrider]

Try a little wax on the edges -

[Kenm810]

I have 4 CW Memory Cards, two that don't stick and two that I put tape on that do.
I used 1" Fiber Packing on mine, like I've seen a few other use, -- it's a little thinner than
Duct Tape and a bit stronger.

[earlyrider]

The tape is a good idea. I've been using it since it was first suggested, I think by Ken.
Ron

[Oldsarge]

Thanks guys. I'll try the tape as soon as I get the cable-come-along off of the memory card . . . :)