PDA

View Full Version : Buds Inventory Reduction



AskBud
08-07-2010, 08:46 PM
Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.
AskBud

Bud's Excess Inventory - 9/21/2010
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
3 On Hand, Cost 35.00 - Memory card Programmer
1 On Hand, Cost 8.00 - Muffler
5 On Hand, Cost 25.00 - QC 1/8 Cutting Bits
3 On Hand, Cost 25.00 - QC 1/16 carving Bits
12 On Hand, Cost 7.00 - QC 1/2 Bit Adapters
16 On Hand, Cost 7.00 - QC 1/4 Bit Adapters

Rocky3213
08-19-2010, 11:49 PM
I'm interested in 1/16 carving bits but I have a new machine and don't use QC's. Will these work? I don't understand "PM replies/orders/confirmations". I'm too new and dense as well.
Rocky

AskBud
08-20-2010, 12:01 AM
I'm interested in 1/16 carving bits but I have a new machine and don't use QC's. Will these work? I don't understand "PM replies/orders/confirmations". I'm too new and dense as well.
Rocky

PM=Private Message. Rather than a posting to any thread, the PM goes directly to that member.
Click on the members name, and it is one of the options you will see.

The 1/16 carving bit and the 1/8 cutting bit, that are made for the QC Adapter, will not work in the CarveTight (CT) chuck. This is due to the type of metal from which they are made (Carbide). Those two bits require a pressed on sleeve for use in the CT.
AskBud

CarverJerry
08-22-2010, 03:56 PM
You mean that the 1/16"carving bits and the 1/8" bits you have are not carbide? Are they high speed steel?

CJ

AskBud
08-22-2010, 04:10 PM
You mean that the 1/16"carving bits and the 1/8" bits you have are not carbide? Are they high speed steel?

CJAs stated by LHR, The 1/16 Carving and the 1/8 Cutting bits are carbide but will not be secured tightly enough in the split collet used in the CarveTight Assembly (CT). The carbide shank, on these two bits, requires a "Pressed on sleeve" in order to assure that the bit is slip proof in the CT!

They work in the QC Assembly because they have a flat spot for the Adapter screw to hold the bit in place.

My take is that Carbide is harder than normal steel, and therefore not as easy to compress as steel.
AskBud

AskBud
09-24-2010, 10:00 PM
http://forum.carvewright.com/images/icons/icon1.gif Buds Inventory Reduction


Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.
AskBud

Bud's Excess Inventory - 9/24/2010
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
2 On Hand, Cost 35.00 - Memory card Programmer
1 On Hand, Cost 8.00 - Muffler
3 On Hand, Cost 25.00 - QC 1/8 Cutting Bits - 2 others on reserve at present
3 On Hand, Cost 25.00 - QC 1/16 carving Bits - Reserved - Sale Pending 9/25/2010
12 On Hand, Cost 7.00 - QC 1/2 Bit Adapters
16 On Hand, Cost 7.00 - QC 1/4 Bit Adapters

AskBud
09-27-2010, 12:24 PM
Buds Inventory Reduction


Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.
AskBud

Bud's Excess Inventory - 9/27/2010
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
2 On Hand, Cost 35.00 - Memory card Programmer
1 On Hand, Cost 8.00 - Muffler
NONE On Hand, Cost 25.00 - QC 1/8 Cutting Bits - 5 on reserve at present
12 On Hand, Cost 7.00 - QC 1/2 Bit Adapters
16 On Hand, Cost 7.00 - QC 1/4 Bit Adapters

AskBud
09-29-2010, 02:07 PM
Buds Inventory Reduction


Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 9/29/2010
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
2 On Hand, Cost 35.00 - Memory card Programmer
1 On Hand, Cost 8.00 - Muffler
NONE On Hand, Cost 25.00 - QC 1/8 Cutting Bits - 3 on reserve at present
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters New price
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters New price

AskBud
10-16-2010, 12:27 PM
Buds Inventory Reduction


Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 10/16/2010
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
2 On Hand, Cost 35.00 - Memory card Programmer
1 On Hand, Cost 8.00 - Muffler
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 4/$20
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 4/$20

AskBud
02-21-2011, 11:58 AM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 2/21/2011
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
1 On Hand, Cost 35.00 - Memory card Programmer
1 On Hand, Cost 8.00 - Muffler
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25

AskBud
03-17-2011, 10:42 AM
Buds Inventory Reduction


Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 3/17/2011
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
1 On Hand, Cost 35.00 - Memory card Programmer
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25

AskBud
04-18-2011, 06:23 PM
Still available.
Buds Inventory Reduction


Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 3/17/2011
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
1 On Hand, Cost 35.00 - Memory card Programmer
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25

AskBud
08-31-2011, 10:49 PM
Buds Inventory Reduction


Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 9/1/2011
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25
5 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

cestout
09-01-2011, 03:12 PM
When I changed to the CT, when a pressed on bit wore out, I had a machine shop press out the worn bit and press in the like new QC bit. I just handed my son (He takes them the the AFB where he works) two worn CT carving bits and two good QC cutting bits. This is the last of them.
Clint

AskBud
10-15-2011, 06:50 PM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 9/1/2011
All costs include shipping

7 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25
5 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

davidbf
10-25-2011, 11:31 AM
Hi Bud,
Would you happen to have any bearings for the Z-TRUCK ? I need the non-adjustable ones or maybe the whole Z-TRUCK. I'm sure its the Z & not the Y, its the bearings for the part that holds the bit & goes up & down.


David

AskBud
10-25-2011, 11:41 AM
Hi Bud,
Would you happen to have any bearings for the Z-TRUCK ? I need the non-adjustable ones or maybe the whole Z-TRUCK. I'm sure its the Z & not the Y, its the bearings for the part that holds the bit & goes up & down.


DavidSorry, I have no bearing nor trucks.
AskBud

AskBud
10-27-2011, 05:25 AM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 10/27/2011
All costs include shipping

1 On Hand, Cost 25.00 - 1/16 carving bit with QC adapter (NEVER USED)
1 On Hand, Cost 25.00 - 1/8 cutting bit with QC adapter (NEVER USED)
8 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25
5 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

AskBud
11-01-2011, 01:31 PM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 11/2/2011
All costs include shipping

1 On Hand, Cost 25.00 - 1/8 cutting bit with QC adapter (NEVER USED)
8 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25
More coming soon, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

AskBud
11-09-2011, 12:23 PM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 11/9/2011
All costs include shipping

1 On Hand, Cost 25.00 - 1/8 cutting bit with QC adapter (NEVER USED)
8 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25
6 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

Digitalwoodshop
11-26-2011, 02:22 PM
Ask Bud,

Are the brushes from LHR or from Ace Hardware and sanded down? Picture please.

And is that 6 sets of 2 or 6 each?

Thanks,

AL

AskBud
11-26-2011, 02:41 PM
Ask Bud,

Are the brushes from LHR or from Ace Hardware and sanded down? Picture please.

And is that 6 sets of 2 or 6 each?

Thanks,

ALAl,
The Cut motor brushes are from LHR. I just ordered a bunch to help defray the shipping cost to others.
AskBud49287

AskBud
11-27-2011, 05:45 PM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 11/27/2011
All costs include shipping

1 On Hand, Cost 25.00 - 1/8 cutting bit with QC adapter (NEVER USED)
8 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25
6 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

AskBud
12-31-2011, 01:32 PM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 12/31/2011
All costs include shipping

8 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$25
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$25
6 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

AskBud
01-05-2012, 10:44 AM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 1/5/2012 All costs include shipping
1 OnHand, Cost 25.00 - 1/8 Cutting Bit for QC with adapter Brand New
8 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$22
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$22
6 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)

AskBud
03-30-2012, 09:34 PM
Buds Inventory Reduction

Since I have changed to the CarveTight assembly, I have decided to reduce my parts inventory.

I will only respond to PM replies/orders/confirmations. That way this thread should remain a listing of items still available. All quoted costs include shipping.

Checks or Money Orders accepted.
AskBud

Bud's Excess Inventory - 3/30/2012 All costs include shipping
1 OnHand, Cost 25.00 - 1/8 Cutting Bit for QC with adapter Brand New
8 On Hand, Cost 7.00 - QC Bit Release Tool
12 On Hand, Cost 6.00 - QC 1/2 Bit Adapters 6/$22
16 On Hand, Cost 6.00 - QC 1/4 Bit Adapters 6/$22
6 On Hand, Cost 10.00 per set of 2 -Cut Motor Brushes (new)