Running hours

[icauto]

Hello,

I just received a C version machine. Where do I go on the LCD menu to see the runtime hours of the machine?

[Kenm810]

Check in the Owners Manual, under Navigating the Menus Via the Keypad and LCD


Configuration Menu Options
The configuration menu allows the user to set project and machine
settings as well as access important run-time and serial number data. To
access the Configurations Menu, select the “0” (Options) key at the

CarveWright Main Menu

or use the up/down arrows to locate the menu
and press ENTER. Use the up/down arrows to navigate to the following
menu options:

1) Quality (Default, Draft, Normal, Best)

The Quality menu option lets the user change the carving quality of
the project on the fly. Selecting default will use the settings selected
in the Designer software.
2) Version
The Version menu option will display the version number of the
control system firmware.
3) Usage Odometer
The Usage Odometer menu option will display the usage of the
machine in hours and minutes.
4) Show Serial Number
Selecting the Show Serial Number menu option will display the
machine’s unique serial number.
5) Jog Touch (Off/On)





Should do it for you.