PDA

View Full Version : Y axis stall 299


flamesrule
02-23-2010, 06:59 PM
Hi can anyone out ther help me out i was half way though a test carve and the machine stopped and said Y axis stall 299.Cant seem to see any posts on this.Any help would be great..
fsu304
02-23-2010, 07:43 PM
Rod,

The y axis stall isn't on the machine I just sent you is it?? I have never seen that error before.

Heath
fwharris
02-23-2010, 07:47 PM
Hi can anyone out ther help me out i was half way though a test carve and the machine stopped and said Y axis stall 299.Cant seem to see any posts on this.Any help would be great..

Rod,

Here are a few posts I found on "stall 299".. Not sure if any will help or not.

http://forum.carvewright.com/showthread.php?t=13929&highlight=stall+299

http://forum.carvewright.com/showthread.php?t=13708&highlight=stall+299

http://forum.carvewright.com/showthread.php?t=13804&highlight=stall+299
flamesrule
02-23-2010, 07:48 PM
ya it is heath i think in transport something happened but i will get it figured by the help of the guys on here.
fsu304
02-23-2010, 07:48 PM
Rod here is a forum post on that error you are getting.

http://forum.carvewright.com/showthread.php?t=13929

Heath
fsu304
02-23-2010, 07:50 PM
Well let me know if we need to get FedEx invloved for Damage repairs. I promise to you that it never had any stalls of any kind. once the zpack thing was replaced the z axis stall no longer occurred.

Don't hesitate to call if you need anything from my end.

Heath
flamesrule
02-23-2010, 07:57 PM
Not a problem Heath we will work it out.and i thank you for being involved
fsu304
02-23-2010, 08:04 PM
Well I feel awful, I don't want this to be the same experience as you had with your truck motor.

Just to let you know, when I first got the machine I soaked the flex shaft in the Liquid Wrench Industrial Chain Lube that everyone on the forum suggested to keep the sheathing from overheating. I am not sure if you can over oil that shaft causing it to slip and give you the y axis stall or not. Just didn't want you to think it wasn't ever lubed.

Heath
flamesrule
02-23-2010, 08:11 PM
oh i did put molly lube on the flexshaft last night as it did look a little dry but i dont think that is the problem.Don`t feel bad cause it will get figured out and if i need parts well thats the way it goes i guess LOL!!!
fsu304
02-23-2010, 08:27 PM
yeah the Chain lube that I used has Molly also. I do remember a post a while ago that talked about too much lube on the Flex shaft but can't remember what the problem that occurred was.

Well I certainly hope it doesn't turn into a spare parts pile.

Also give me a call if you have any problems with LHR switching the machine over to your name.

Heath
flamesrule
02-23-2010, 08:29 PM
the machine is already switched into my name that went very smooth
flamesrule
02-23-2010, 08:59 PM
ok well after checking severel things out thanks to FWHARRIS it turned out to be the wire`s that go from the y truck motor the board the wire`s were loose so i am going to go try a carve.:)
.
fwharris
02-23-2010, 09:28 PM
ok well after checking severel things out thanks to FWHARRIS it turned out to be the wire`s that go from the y truck motor the board the wire`s were loose so i am going to go try a carve.:)
.

Rod,

Glad to know you are making dust now!!!

Just kept going from one to the next to get to the cause...
Since it went from Florida to Calgary something was bound to get jiggled loose!!!