shawn

[shawne]

When I turn on my Carvewright it defaults to the Accessory Menu and does not allow me the change up or down to other menu options.
Does anyone know how to unlock this?

[c6craig]

Not sure if it's the same thing, but mine used to default to Scan Options after an upgrade. Here are the steps MT gave me and it worked:
---------
This should be an easy fix...the machine wants you to set the scanning probe accessory configuration (even if you do not own the probe)

If you have the "new" Z-Pak...

After you put your card in the machine, turn the machine on. It should say “Scan Area”. Press “0”. Scroll down to number 5, User Options. Scroll down to Scan Probe. Make sure it is on “cover” instead of Z truck.

After setting, turn off the machine, wait for the LCD to go blank, then turn on the power again - everything should now be "normal".
--------

Good luck,
Craig