PDA

View Full Version : Rotate Board



Aaron B
07-16-2006, 10:17 AM
Rotate Board: Say you have a board 36*14. When you see the board on the screen the 36" length is horizontal. Is there a way to rotate the board so the 36" is vertical. I know you can manually rotate it and get it that way didn't know if there was an easier way.

I have text that is rotated 90 degrees and it would be easier to place and layout if I had a button or option to rotate the board. Maybe there is and I am missing it.

David M.
07-16-2006, 11:03 AM
Your not missing anything, I've had this same issue and there so far isn't a better way that I've found to change the orintation. It seems like a simple fix to the software, so long as you stay within the 15" limitation this should be an option. CW guys???

Juno2
08-14-2006, 08:41 PM
You want your length to show vertically?
.......edited

I gotcha, I just tried to do it and can't find a way here either. You should still be able to go up to 144" length and view at a 90% rotation if you want. Since the viewer is 3d based, a 90% rotation should be an easy add.

RobertP
08-15-2006, 04:00 PM
All you have to do is rotate the board to the vertical position and hit the square button, it will flatten out the board so you can work vertically.

Juno2
08-15-2006, 04:50 PM
TaDAaa! haha nice, Thanks!