PDA

View Full Version : Bit Stopped Cutmotor Kept Going



MCGEE2SKINNER
12-12-2009, 06:56 PM
Hi Guys
Doing a carving the other day with my most reliable machine the compucarve.
Part way thru the bit stopped and the cutmotor kept going so did the z-truck breaking the bit. Everthing seemed ok but I changed the flex cable anyway. started up ok and carved a little bit and did the same thing another bit. I removed the cutmotor looked inside put the cable in it seemed to fit snug. The cap on the flex cable thet holds the flex in the motor seperated from the cable when I removed it from the motor is that glued on or what. any ideas.
JIM