PDA

View Full Version : Tips & Tricks Oct 2009 Issue - Pattern Editor


mtylerfl
10-31-2009, 03:09 PM
Hello,

Just letting you know the Tips & Tricks Oct 2009 Issue 25, "Pattern Editor - Episode III" has been posted at both the CarveWright website (http://www.carvewright.com/cms/tips-and-tricks) and the CarveBuddy website (http://www.carvebuddy.com/learning_center.html). It is the third tutorial on the Pattern Editor and describes the newest, updated features. A "must read" for Pattern Editor owners!

Special thanks to Jeff Birt for providing this excellent tutorial! Jeff is not only a programmer, educator, and CarveWright machine owner, he is also one of the Moderators on this forum as you probably know!

Check out Jeff's website - he has a really cool add-on for our machines...a Backlit LCD Display!
You can see it at http://soigeneris.com/soigenerisprd.aspx
MCGEE2SKINNER
10-31-2009, 03:47 PM
Hi
I can't seem to find the upper and lower for the magic wand. I am running 1.152.
Jim
mtylerfl
10-31-2009, 04:38 PM
Hi
I can't seem to find the upper and lower for the magic wand. I am running 1.152.
Jim

Sorry Jim,

I think you need to be running the most current version for all the new features to show up. I don't recall whether 1.152 had the upper/lower feature for the magic wand, but I do know that 1.153 (current version) does.

After you perform the update to 1.153, all should be well.
roughcut
10-31-2009, 05:32 PM
I am using the current version 1.153 and I can't find them either
roughcut
10-31-2009, 05:44 PM
Sorry Jim,

I think you need to be running the most current version for all the new features to show up. I don't recall whether 1.152 had the upper/lower feature for the magic wand, but I do know that 1.153 (current version) does.

After you perform the update to 1.153, all should be well.




here is a picture of my tool bar as you can see I don't seem to have the pull down bar at the right of the magic wand tool
roughcut
10-31-2009, 06:00 PM
I don't see the carving tool either could it be that those items are only if you have the stl program
Jeff_Birt
10-31-2009, 06:01 PM
You may have to right click on your tool bar area and click 'Customize'. That will let you add other items to your tool bars.
roughcut
10-31-2009, 06:12 PM
You may have to right click on your tool bar area and click 'Customize'. That will let you add other items to your tool bars.

WOW Thanks Jeff theres all kinds of good stuff in there "THANKS"
MCGEE2SKINNER
10-31-2009, 06:53 PM
Thanks Jeff
I found all of my tools also.
JIM