roller has moved to the right.....help

[scamp62]

Help once again ,….. please !
My rear sand paper roller has moved to the right hand side, and getting an error message.
About the rear roller stall.
So what is the fix ? at first glace it looks like "tare the machine apart !" (god I hope not)
And is there adjustment to straighten it out (like a belt sander) ?

[dbfletcher]

Take a look at some of the posts (earlier) in this thread. I've used this trick a number of times to fix my belts when they have rolled.

http://forum.carvewright.com/showthread.php?t=10651&highlight=belt+trick

Doug Fletcher

[Digitalwoodshop]

Roller stayed and sand paper belt moved.... Paper belt is most likely rolled over on the other end....

You must follow the PDF for Sand Paper belt replacement....

You can replace the belt or cut the rolled over part off the belt....

Many use a narrow belt.... Could flip it....

A board placed at an angle is the #1 reason why the belt is rolled over....

Good Luck,

AL

[scamp62]

thats a great trick........will try ! 8)
thank you so much !