View Full Version : What am I doing wrong
MCGEE2SKINNER
08-09-2009, 02:08 PM
Hi Guys
I scaned a santa went into the pattern editor removed the backround saved to pattern lib. When I brought it up and put it on a board I got a cutout all around it what happened?
Any help
Thanks
JIM
bjbethke
08-09-2009, 02:33 PM
Hi Guys
I scaned a santa went into the pattern editor removed the backround saved to pattern lib. When I brought it up and put it on a board I got a cutout all around it what happened?
Any help
Thanks
JIM
I Really need to see your MPW file to help you. If you did not save this ... you may need to rescan. I can not do much with the JPEG’s you posted. A 7kb JPEG is just a bunch of little squares. PM me and I'll send you my e-mail. You need to zip this file to post it on the forum ..., but then you will be giving away the ownership of the pattern.
You may need a board that is one inch thick or more, or chance your depth setting.
The scan looks great.
HighTechOkie
08-09-2009, 02:38 PM
It looks like a deep pattern(0.75") on a shallow (0.5")board. I bet if you increase your board thickness, those cutout pieces come back. Rob
Kenm810
08-09-2009, 02:42 PM
Hi Jim,
Did you remember to flip your cut :wink:
Steven Alford
08-09-2009, 03:00 PM
I always wondered what that was for. What does it actually do Al?
Kenm810
08-09-2009, 03:17 PM
It flips your cut from the inside to the out side of the pattern outline :cool:
AskBud
08-09-2009, 03:19 PM
I always wondered what that was for. What does it actually do Al?
The "Flip Cut" changes/moves your cutter from the inside of the line to the outside portion. As you click on the option you will see the change.
AskBud
MCGEE2SKINNER
08-09-2009, 04:02 PM
Hay
Thanks the depth was way too deep over 1inch that solved the problem
Thanks JIM
MCGEE2SKINNER
08-09-2009, 04:15 PM
Here it is have fun
Thanks Jim
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.