View Full Version : X axis stall
13Z5M
07-07-2009, 01:11 PM
Hi,
Moved to troubleshooting area.
Thanks,
Steve
Digitalwoodshop
07-07-2009, 01:41 PM
Lots of reasons for a X Stall.... (Sand Paper Belts.....)
First is a Wedge shaped board, like a door wedge will jam.
Second is a rolled over sand paper belt. Placing a board in the machine at an angle is the leading cause for the rolled belts.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.