AskBud
05-01-2009, 08:53 PM
Design a Stain Glass Project
OK, I've make an 82.2 MB AVI on what I have learned today about designing a Stain Glass Project that uses the "V" Bit rather than the standard Carving bit.
The design portion takes a while, but the time savings on the carve is well worth the extra time at the PC (especially if you plan on using the design many times).
When you are ready to carve these projects, use material with a nice surface as there should be little need for clean-up.
AskBud
Here is my 82.2 MB video.
http://www2.wcoil.com/~nharbison/CW-Design%20a%20Stain%20Glass%20Project.zip
OK, I've make an 82.2 MB AVI on what I have learned today about designing a Stain Glass Project that uses the "V" Bit rather than the standard Carving bit.
The design portion takes a while, but the time savings on the carve is well worth the extra time at the PC (especially if you plan on using the design many times).
When you are ready to carve these projects, use material with a nice surface as there should be little need for clean-up.
AskBud
Here is my 82.2 MB video.
http://www2.wcoil.com/~nharbison/CW-Design%20a%20Stain%20Glass%20Project.zip