PDA

View Full Version : What text fonts will the machine carve?



yenne
02-27-2006, 02:07 PM
The CarveWright design software is able to use all fonts installed on your system. There are three distinct text effects that can be created with the software. Raster mode carves the letters in relief with thin passes, one after another; similar to the way a printer works. Outlining text produces a cut at the perimeter of the letter. Center-lining the text will generate a centerline and will vary the depth of the cutting bit based on the width of the original font. The center-lining carving is done with a 60 or 90-degree v-groove bit.

http://www.carvewright.com/images/texttypes.jpg