RobertP
04-19-2009, 05:46 PM
Thought I would pass on a little tip here. I have been having a heck of a time with a sticky QC, I couldn't get it to snap up enough to get a bit in it, even after a meticulous cleaning regimen.
So, instead of using my normal blow gun, I opted for a can of compressed air, while pulling up on the sleeve I found that blowing a little air down with the straw provided around the sleeve made it snap up easily.
I tried this same method many times with my blow gun and could not get it to work, maybe the straw is small enough to direct the air just where its needed.
So, instead of using my normal blow gun, I opted for a can of compressed air, while pulling up on the sleeve I found that blowing a little air down with the straw provided around the sleeve made it snap up easily.
I tried this same method many times with my blow gun and could not get it to work, maybe the straw is small enough to direct the air just where its needed.