View Full Version : Wilderness Project Question
dvel56
04-10-2009, 08:29 PM
Has anyone carved this project in Oak or Walnut?
I have carved it in Poplar and the finish is very blotchy even with the wood conditioner Micheal suggested
Thanks
Dvel
Dan-Woodman
04-10-2009, 08:34 PM
Thats Poplar for ya. For the nicer projects, stick with the more dense hardwoods
Walnut, maple, cherry,etc.
later Daniel
dvel56
04-10-2009, 08:43 PM
Thanks Dan
I will try this in some Walnut I'm just affraid that all the carving in that hard of wood will destroy my QC and ruin my adapters
TerryT
04-10-2009, 10:07 PM
Over 650 hours on my machine and 85 to 90% is on walnut and cherry.
SteveEJ
04-10-2009, 10:18 PM
I used Alder. It is very cherry like. Turned out great! Used Stain Prep before staining. I have not had very good luck with Poplar in the past.
Steve
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.