PDA

View Full Version : rosette


normd
03-13-2009, 11:42 AM
How wood I aproximate this 1.5x 1.75 square http://C:\Documents and Settings\Administrator\My Documents\My Pictures\QuickCam/pic.jpg withraised rosette?
Dan-Woodman
03-13-2009, 11:57 AM
If thats the rosette from the basic library, you can just invert it to make it raised.
Is that what you mean , is it concave now when you cave it?
later Daniel
AskBud
03-13-2009, 11:58 AM
How wood I aproximate this 1.5x 1.75 square http://C:\Documents and Settings\Administrator\My Documents\My Pictures\QuickCam/pic.jpg withraised rosette?

Play with the Rosette, in your library, and a "Carve Area".
From what I can see the Rosette is recessed/inverted within the box. If that is what you are looking for , you may need to design 4 carve areas to surround the rosette so you have the raised box remaining.
AskBud
normd
03-13-2009, 01:33 PM
that is a picture of a chair leg someone showed me. How would I draw it in designer ? Which of the help/tutorials shows how to populate a circle with copys of the "leaves/petals" etc?
Normd
cnsranch
03-13-2009, 02:17 PM
Here's one way or the other...
normd
03-13-2009, 02:34 PM
I'd like the pattern raised and 20 padals . who do I copy and ratate so as to have one every 18 degrees ??
Norm D
ChrisAlb
03-13-2009, 04:31 PM
Here's a quick one I put together in PSP. Not exact but it's close. Hope it helps.
gashawk
03-13-2009, 05:16 PM
try taking this apart, pedals are sit so they could mirror four ways. As 9 degrees 27, 45 etc.
liquidguitars
03-13-2009, 07:54 PM
Here is one i made you could try.



LG
HighTechOkie
03-13-2009, 08:40 PM
This should be fairly close. If you need the petals to come up more to a point, just let me know.

Rob
TIMCOSBY
03-14-2009, 12:11 AM
to your question is that you can't do that in designer thats why everyone else is using photoshop, corel draw etc. to make "patterns".
normd
03-14-2009, 05:53 AM
several of these are perfect for what I'm doing
Great community of people here!
Norm D
ChrisAlb
03-14-2009, 06:24 AM
to your question is that you can't do that in designer thats why everyone else is using photoshop, corel draw etc. to make "patterns".

Actually Tim, it can be done in Designer with a little patience. Did this over my morning cup of coffee. Roughly 45 minutes. I didn't spend the time to align all the petals "perfectly" but you can get the idea.

Drew the first petal with lines and arcs and applied a Horizontal dome surface. (Lines at 9 degree angles)
Made that one petal a group and used the "Make pattern tool" to make a pattern.
Then just set the pattern at + and - 18 degree's all around.
Center circle is just a double dome surface.

Designer is actually quite capable with a little imagination and math...LOL