How Dose It Carve

[bawell]

Just wondering if any one has used Butternut wood in there CW \ CC and how it turned out. Thanks.:-D

[Kenm810]

Hi bawell,

Butternut is one of the softest woods to carve
It's easy to Dent when Handling or Carving.

Here's a .pdf of a good Wood Hardness Chart that I use

[wooden nickel]

Butternut is soft like Ken say's. It will be real hairy if you carve it ,it also sands bad. After carving brush plenty of sanding sealer' it will help.

Wooden nickel

[bawell]

Thanks for the information:D