Using Carvewright with soft aluminum?

[velox]

I just found out about this machine and want to know if it can be used with soft aluminum. I know the bigger machines have no problems with AL.
Can the depth of cut be adjusted so it takes a number of cuts to acheive the desired cut ?
Thanks for any help in ths area.

[HelpBot3000]

Hi Velox,

Aluminum and all other metals are NOT recommended for this machine. All recommended materials can be found on the FAQ section of the CarveWright website. Hope that helps out.

[Kenm810]

The CW and CC Carving Machines have exposed Circuity and Circuit Boards
they really should not be used to carve any kind of Metal!!

[mtylerfl]

I just found out about this machine and want to know if it can be used with soft aluminum. I know the bigger machines have no problems with AL.
Can the depth of cut be adjusted so it takes a number of cuts to acheive the desired cut ?
Thanks for any help in ths area.

I know that CarveWright currently does not recommend the carving or cutting any metal of any kind in the machine. Possibly because metal shavings produced may interfere with mechanics and electronics.