Has anyone carved the Stations of the Cross series. If so how did they turn out, what type of wood etc. Would like to know before purchasing patterns
Thanks
Has anyone carved the Stations of the Cross series. If so how did they turn out, what type of wood etc. Would like to know before purchasing patterns
Thanks
Sorry for bad picture but it will give you some kind of idea.Here is a picture of one carve in just pine about 5 minutes of sanding -oak stain rubbed off. The picture is before any poly or any thing applied to top. Im coating them all with 2 part epoxy for a outside clock. The one in the picture is 10" high .75 thick
Last edited by eromran; 09-30-2009 at 02:03 PM.
Ver 1.179
HP-Nvidia HD Video Card
Windows 7 Ultimate
Scanning with Carvewight Probe and Next Engine 3d Laser Scanner HD
If you have any scanning needs let us know.Check Out Our Patterns in the depot under eromran
If you allow it to happen, you can let today erase all of yesterday or if you choose,you can let yesterday erase the rest of your life.
Ed