this one we made for our nephew.
this one we made for our nephew.
Thanks guys,I have those, I have a customer who would like bells that I will put on a plate.
later Daniel
1.187 Custom Woodworking for more than 40-years
Add some Bows and maybe these might get you started
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Or with a bit clean up maybe these
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
3 Bells, the PTN is too large. PM yor e-mail and I will send it to you.
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.
I also have a MPC to carve with the "V" bit
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.
Thank you so much, you guys are the best.
later Daniel
1.187 Custom Woodworking for more than 40-years