WOW LG, you can crank out a piece like that between the new 1.130 release time and now?? Impressive!!
WOW LG, you can crank out a piece like that between the new 1.130 release time and now?? Impressive!!
Christopher Neil Albrecht
Occasional Carvings
Just A Flowing With The Grain
Ver. 1.187 on XP Pro Desktop
Ver. 1.187 on Win. 7/64 Laptop
Patterns At The Depot
thats the idea to get the parts out quickly.WOW LG, you can crank out a piece like that between the new 1.130 release time and now?? Impressive!!
Right now it takes under 3 days to mill this guitar with 2 CW's. on a Hass it would be under a day I guess.
Thanks
LG
Last edited by liquidguitars; 07-30-2008 at 03:54 PM.
My 21 year old nephew has a band. I think I'll make him a new cutom one. He picks a strat now. I put mine down years ago but I still have my Martin 12 string and my Guild 6 string. Sold my piano though...
Christopher Neil Albrecht
Occasional Carvings
Just A Flowing With The Grain
Ver. 1.187 on XP Pro Desktop
Ver. 1.187 on Win. 7/64 Laptop
Patterns At The Depot
ok i did a search now how do i get the firmware back on my card i do not like it cutting in one path i have not had any fires but i am afraid my machine will over heat
jeff
DO NOT FEED ! THE DRAGON
Can you give use some details like..
How deep is the cut, what woods are you cutting?
have you cleaned and lubed your flexshaft lately?..
are you bits in good shape?
LG
cut depth is .125 i clean the bits and i did lube the shaft i touch the shaft and it is slightly warm my question now is i want to go back to multi pas cutting how do i do that at this time i am using red oak but i have a very large supply of douglas fir
Last edited by dragoncarver; 08-09-2008 at 11:33 AM.
jeff
DO NOT FEED ! THE DRAGON
wow i just noticed that you make violins. i am a celloist my son plays left handed strat not as well as jimmie ( i hear dead musicians on the radio )
jeff
DO NOT FEED ! THE DRAGON
thanks I have a lefty PRS i am building soon.. and would love to build a cello 2.
Thats odd.. 1.126 will cut .125 " in one pass anyway.cut depth is .125
One way , is to keep 1.130 software installed and use the 1.126 firmware on the memory card only when needed.
LG
Last edited by liquidguitars; 08-09-2008 at 04:36 PM.
i would be happy to give you any measurements from my cello if you need them/ the bit does cut but the flex shaft shacks quite a bit it does not get hot still how do i get the old version back on my memory card
jeff
DO NOT FEED ! THE DRAGON