Results 1 to 4 of 4

Thread: craving pocket region

  1. Default craving pocket region

    When craving say a 6" square pocket region 1/2" deep, how do I leave a 2" square cube in the center of the crave? I should know the answer but I don't.

  2. #2
    Join Date
    Feb 2007
    Location
    Southern Delaware
    Posts
    1,064

    Default

    Probably different ways but I would create the 6" carve region 1/2 " deep, center both ways. Then create a second carve region in the center 2" with a depth of .001 and center both ways. Should give you the uncarved block in the center. Hope this is what you're looking for, if not let us know.

  3. Default

    Quote Originally Posted by want2b View Post
    Probably different ways but I would create the 6" carve region 1/2 " deep, center both ways. Then create a second carve region in the center 2" with a depth of .001 and center both ways. Should give you the uncarved block in the center. Hope this is what you're looking for, if not let us know.
    Thank you. I'll give it a try.

  4. Default

    Quote Originally Posted by want2b View Post
    Probably different ways but I would create the 6" carve region 1/2 " deep, center both ways. Then create a second carve region in the center 2" with a depth of .001 and center both ways. Should give you the uncarved block in the center. Hope this is what you're looking for, if not let us know.
    that's not my neighbor
    After carving, smooth the carved area with sandpaper or a smoothing tool to ensure the pocket is even and the central cube edges are clean and defined.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •