I keep getting range error and mark is about 30 deg off? Haven't done rotary in some time. Had this trouble before and don't remember how I fixed it.
thanks
Clint
I keep getting range error and mark is about 30 deg off? Haven't done rotary in some time. Had this trouble before and don't remember how I fixed it.
thanks
Clint
See if any of this helps you out..
http://support.carvewright.com/troub...g-calibration/
I see that you have made a double post. I will delete your other one.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Almost always, due to the rotary improperly placed in machine. Double-check.
http://support.carvewright.com/troub...g-calibration/
CarveWright CX Packaged System - starting at $2000
CarversClub 1 Year Subscription - $150.00/year
Adv. Support w/out CC membership - $25.00/issue
CarveWright Community Forum - PRICELESS!
I checked the screws and retightened with a hand driver. Turns freely. Aligned correctly, but each time I reinstall the jig it acts differently - 60 deg past or 160 deg off. Moved from the C machine to the B. Cal rotates 2 1/2 revs then rotates at a creep and won't stop ignoring any key input - power off to stop. Retired and when, cursering to divot, starts rotating slowly and won't /can't stop? Measures a flat board just fins and just finished carving a project. Tried calibration with two different cards.
Really strange? I need to do at least 7 rotary carves for grand (and greatgrand) kid Christmas presents.
Clint...call and talk to Joe.
CarveWright CX Packaged System - starting at $2000
CarversClub 1 Year Subscription - $150.00/year
Adv. Support w/out CC membership - $25.00/issue
CarveWright Community Forum - PRICELESS!