RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Thanks so much for this information!! I called carvewright to order the power supple. Chris told me to measure my carbon brushes. They were under 1/4, .250 so I called him back. He said that's your problem so I ordered them. I'll keep ya posted.
Some people gripe about Carvewright's postage, but it can usually be circumvented by ordering extra parts that you're likely to need. Brushes at 250 hours - if you're using your machine quite regularly, why not order two pair at once? The flex cable is another good part to have on hand. Or even order an extra bit or two.
Dag nab it Dick! You are exactly right. Wish I had thought of that! It was $12 bucks to ship that little envelope. I bet I could have gotten a lot more on this order for the same price.
Well. I just got my new carbon brushes. I put them in and reassembled my machine, Greased my flexshaft and ran a cut motor test run. It worked without a flaw. Ran it twice for ten minutes , no problems. I want to thank every one that helped solve this problem,especially Chris at Carvewright who suggested I try the brushes before spending a lot of money on other things. Start with the cheapest fix I guess is what he was saying!