I am a newby, just got my CW machine this month and already I am causing trouble. Like we all do(oh for sure)I am reading the S/W Manual. I am sure that the manual has been written for version 1.--- of the CW S/W. In attempting to follow the manual and execute the instructions, there appear to be differences in the manual descriptions and what appears on my screen and what I am able to do. This, as a newby is very confusing. In fact several things that I did according to the manual caused my project to delete, the program to shut down and when I double clicked the short cut restart the program the program would not respond. To get it back I had to restart my computer. Now I know many of you are saying it serves me right for reading the manual its just not done. Now I note that there is a manual for the A and B versions of the CW machine and a separate manual for the C machine. Might it be a smart move to have a separate manual for the 2.--- S/W? I realize that it would be a lot of work, especially for something that is read by very few(yes it is true). If this causes way too much work, would it be practical to issue a suplement to the version 1.--- S/W manual denoting the Version 2.--- S/W differences on a page by page basis? This would be of great help to we newby's who were never familiar with the version 1.--- S/W. What do you think LHR?
THE NEXT THING THAT REALLY HACKS ME OFF IS THAT WHEN I SPEND 30 MINUTES TYPING A NEW THREAD, I AM TOLD THAT AM NOT LOGGED IN AND CAN'T POST. GUR GUR