Anyone know of a good place to buy clock movements on the cheap? Thinking of pumping out some clocks for craft shows. Thanks!
Anyone know of a good place to buy clock movements on the cheap? Thinking of pumping out some clocks for craft shows. Thanks!
Kansas Wood Shop
Disabled Veteran owned and operated
Visit www.kansaswood.com
A machine with rock, CS machine, Designer 3, centerline, conforming vectors
Klockit.com
Klockit and buy them by the case of 100 to save....
Get the Wrench and the little tool to put the little hand nut on too... And the little metal brackets to hang the clock.
They sell a AC Adapter with either a AA or C battery. That would work if you wanted to add some LED's to the clock...
Have Fun,
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
X3! Like Al says, if you know your going to be doing more than just a few go for the "lot" pricing.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Great, thanks guys! Now I just have to design some patterns.
Kansas Wood Shop
Disabled Veteran owned and operated
Visit www.kansaswood.com
A machine with rock, CS machine, Designer 3, centerline, conforming vectors
An idea primer 1
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Idea Primer 2.
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
More BEARS... Bears sell here.....
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Ok Al, thanks! Now, I noticed a lot of them don't have the movements. Do you do that for ease of storage? Then put the movements in when someone buys it? Can you give me an idea of what you sell those for? I appreciate the ideas, those are awesome. I am going for military, cowboys and biker type themes here.
Kansas Wood Shop
Disabled Veteran owned and operated
Visit www.kansaswood.com
A machine with rock, CS machine, Designer 3, centerline, conforming vectors
Yes, I store and display them normally without the movement as it is too easy to bend the hands. I also buy the red second hand as people like that too. The hands come with the clock. I can sell the clocks all day at $35.00 but have a harder time at $45.00 unless it is custom. That is where the tools come in handy, when you have a line of people waiting for the clock to be installed and PAY.... Especially the little nut tool for the hands.
You can buy the 24 hour movement too since you are going after the Military Market. As always careful of Copyright Stuff. When I worked at Sony I would visit Ft Dix and was friends with the Engraver on base. He sold many plaques with Combat Knives mounted to them... Some as Clocks and some as End of Tour Awards.
Good Luck,
AL
Last edited by Digitalwoodshop; 06-10-2013 at 03:18 PM.
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com