Another box

[jpeter14]

I need to make and update. KenM , I think made the first post of the lid, then eelamb did some work and re-posted with MPC, that is the one I downloaded. Thank you eelamb. Someone ask abot how I made the box, I would not be able to without eelamb's permission, as I think he has removed his MPC post.

[Kenm810]

I'm pretty sure Eddie may have posted first with his Belts and Buckles Lid,
and I just added a bit of a Dome to his work. My Memory is not what it used to be,
half the time I can't even remember what I had for breakfast on any given day.

[eelamb]

I was staying out of this post, but yes the one he posted is the pattern I made. There are three patterns total, #1, the belt, #2 the dome top of box with raised end boards, and #3 of the straps by them self. I placed the belt and dome top in an MPC that has since been removed from the forum as well as the belt. If you are interested in this set that includes the above plus the front/back of the box with the raised boards on the end, just PM me.

Kenm is the one that showed the trunk lid using the belt pattern I made. I just took it further in 3D. I can not match the ability Ken has in designer.

[eelamb]

Bump since I edited the post before this one. Please read.

[eelamb]

Wanted to bump this old thread. The steamer truck patterns is on my site under shared patters, and objects. There you will find many more box sides, as wellas the steamer truck patterns. For steamer truck look at page 1, 2, and 5. Click on each pattern scroll down and click on download.

[eelamb]

I have had a few request for this steamer trunk. Originally I called it a belt box, and it was listed on my site that way. I noticed some of the original parts were missing on my site. So I put it all together in one MPC file. Mix and match to your liking, add handles, lock, make your own top and add the belt. Add the straps to the side, or top. Or just make the standard steamer trunk without the belt. This can be re sized to suit your needs.

[rcdages]

Box is outstanding.

Great work.

[Bigtyme]

The box is really cool, Eddie. With some size mods, the uses are many...thanks for sharing it...

[Icutone2]

Great Box (Trunk) and thanks Eddie I will be trying your Mpc file. Thanks again.
Lee

[eelamb]

Icutone2, you noticed!!!! Could not get truck out of my mind while typing, had changed it many places but I see not all.

Thanks everyone, this one has been around for a years or more.