I took today off of work and decided to have a little fun-- here's a coffee grinder that I've been meaning to make for LOML for a while now.
I made a new lightweight sled for the 1/2 material and just centered each board and carved away. I then used the new waterbased minwax onyx stain on the carves with a small brush. This was the first time I've used this product other than a small test piece-- I have to say, this stuff is AWESOME.
http://www.acehardwareoutlet.com/pro...rce=GoogleBase
I got mine at Home Depot and it was about $8
Anyway, I finished the piece with some shellac and tomorrow I'll hit it with a quick shot of lacquer, but for all intents and purposes it is done. I'll also include a grouped MPC in case anyone wants to use any pieces.
Thanks for looking,
Lawrence