Can someone help me with this Adirondack chair pattern. The lines are jagged. If you have a better one that's OK but it has to look like this one at this angle.
Thanks in advance for your help!
Can someone help me with this Adirondack chair pattern. The lines are jagged. If you have a better one that's OK but it has to look like this one at this angle.
Thanks in advance for your help!
Tom Watson
Two CW's and D.C.-Top Mount Insert @ Ringneckblues.com Get the dust out!!
50" X 48" PDJ Pilot Pro CNC http://www.pdjinc.com
Check out my Facebook page for current carvings at http://www.facebook.com/signsinwood
Watsons Wooden Words http://www.signsinwood.com & Messages in Wood http://www.messagesinwood.com/
Tom
It looks better if you "invert" the pattern. Just an idea. If you "carve it" it may tend to break the lines also.
later Daniel
1.187 Custom Woodworking for more than 40-years
Tom, I converted the picture to a DXF and it looks good cut with a 60 deg. bit at .100 you can open the MPC and copy and paste it to your project if you think it will be suitable.
Ed
I didn't know if you have conforming vectors or not, so just for you to test, I changed the whole MPC into a vector carving. With the edges routed, it would look good to me. see the Relax.mpc
Last edited by edzbaker; 07-19-2011 at 07:13 PM.
My Website: www.edscustomcarved.com
Patterns or projects made, and uploaded by me, are not to be sold on E-Bay, EVER !.
Thank You....
Ed
I got nothin' but a black screen. The carving list is on the left, but just a black screen otherwise.
later Daniel
1.187 Custom Woodworking for more than 40-years
Tom Watson
Two CW's and D.C.-Top Mount Insert @ Ringneckblues.com Get the dust out!!
50" X 48" PDJ Pilot Pro CNC http://www.pdjinc.com
Check out my Facebook page for current carvings at http://www.facebook.com/signsinwood
Watsons Wooden Words http://www.signsinwood.com & Messages in Wood http://www.messagesinwood.com/
Ed
I didn't know if you have conforming vectors or not, so just for you to test, I changed the whole MPC into a vector carving. With the edges routed, it would look good to me. see the Relax.mpc[/QUOTE]
Thanks Ed, It's perfect and will is what I need!
Tom Watson
Two CW's and D.C.-Top Mount Insert @ Ringneckblues.com Get the dust out!!
50" X 48" PDJ Pilot Pro CNC http://www.pdjinc.com
Check out my Facebook page for current carvings at http://www.facebook.com/signsinwood
Watsons Wooden Words http://www.signsinwood.com & Messages in Wood http://www.messagesinwood.com/