Can the carvewright cut a 262" radius on a piece of mdf that is 13" x 130"?
Can the carvewright cut a 262" radius on a piece of mdf that is 13" x 130"?
If your just after a radius then a circle jig, and wood Stands using a band saw are your best bet.... Norm did it a few times on his show..
I setup a 13.5 inch board x 12 feet.... Made a 122 inch radius just to see what it would do.... Assigned a Cut Path.... Got "TILT"
Wrong tool for the job..
Edit:
On second thought... You could make a closed path Arc and assign a cut path to it.... So it is possible....
Rmember the resale value of the machine is about $800.00 after that first $1000.00 cut... For Various reasons as no warranty....
AL
Last edited by Digitalwoodshop; 05-02-2011 at 11:24 AM.
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Thanks for the info, my question was just one more reason I want to buy one. The capabilities of the machine are what I am looking at for my small shop. Will post Pics as soon as I get a carvewright and show my project that is due in a month.